Spectrum 375

 

The Spectrum 375 Cutter is used around the world and is one of the leading art cutters used anywhere. The spectrum 375 has a pilot light which is automatic and electronic which allows for the ability to cut without always having to trigger the arc cutter. This option, which is found on the spectrum 375, greatly increases the productivity and also extends the life of the tips. Additionally the speed of the cutting is greatly enhanced by this option.

There are several LED indicators which indicates current cut, power, air pressure, and temperatures. These features ensure for a very quick assessment of actual operating date of the 375 spectrum. These features allow for rapid trouble shooting and quick indications when setting are not correct. Additionally all computerized equipment in the general area of the cutter are protected from high frequency electromagnetic radiation. The internal blowback porch feature eliminates these damaging frequencies.

In places where low voltages or a problem with spectrum 375 provides a safety feature which compensate for voltages down to between 98 to 132 V. This important feature ensures a clean and stable cutting cycle through out every cut. Spectrum 375 is designed to to run on either 115 were 230 V of alternating current. Any standard generator, such as those found on Bobcat and Miller engine drives, can be used to power the spectrum cutter. There is a built-in power saving feature which automatically compensates and requires less power of the cutter when used in low intensity cutting.

The unique blowback porch design sound on the spectrum 375 effectively directs the electric Park current between the electrode and the tip. In another tip saving feature, which is called post-float drooling, allows the tip to cool with continued gas circulation after cutting has stopped. This feature enables the spectrum 375 to be very efficient with respect to how much money is spent on replacing, for example, tips.

Although the spectrum 375 is perfectly designed to for medium duty shop it is also the perfect solution for home hobbyist. Since the lifetime of its considerable products is significantly increased by its added features, the spectrum 375 is the perfect choice for both home and light industrial cutting. The spectrum cutter can be purchased at many mail-order retail locations, local retail stores, or through wholesale outlets. The lowest price expected for the spectrum 375 is around $1200. Used prices for good condition spectrum 375 art cutters run between $500-$700.

For quarter inch steel the spectrum is rated to cut at a rate of 29 inches per minute. For 3/8 inch steel the spectrum 375 is rated at 15 inches per minute. At a maximum thickness of 3/4" steel e-mail or spectrum 375 Cutter is rated at about 6 inches per minute. This cutting rate is at 115 V with 27 amps required of output current. The gas pressure requirement for cutting at this rate are 5 ft.³ per minute with a maintained pressure of 95 pounds per square inch. At 20 7 a.m. at 90 V duty cycle is at 35%.

The Miller spectrum 375 is perfect in all types of light industrial fabrication shops, auto repair and body shops, industrial maintenance department, school and part maintenance departments, or for home use. The 375 is a perfect replacement in most situations for gas torches. The overall costs of operating the spectrum 375 are significantly less than those of gas cutting. Even when the cost of consumables are figured in to the overall operating costs, the Miller cutter is still more economical than gas cutting.