Miller 375 Plasma Cutter
The Miller 375 plasma cutter is one of the leading arc cutters used world wide. The 375 has an electronic pilot which automatically adjusts the pilot circuit which provides the ability to expand cutting without always having to re-trigger the cutter. This option found on the Miller 375 greatly enhances the speed, productivity, and also extends the life of the tip.
Dual voltage is available on the Miller 375 plasma cutter at either 115 or 230 V of input power. It also offers a patented protection in case of an incorrect switch setting. In case of low voltage the Miller 375 provides voltage compensation from 98 to 132 V. This ensures steady and clean cuts throughout the cutting cycle.
The 375 plasma cutter can be powered from a generator source such as a Miller engine drive, bobcat, or any competitive in equivalent equipment. There is a power factor correction enhancement built into the cutter which uses the input power more effectively, thus reducing the overall energy use of the plasma cutter.
There are LED indicators for temperature, cut, power, and air pressures. These features allow for a fast assessment of the current operating states of the plasma cutter and also allows for fast troubleshooting. Additionally, if computers are used in the area, the Miller 375 plasma cutter starts without using high frequency. Therefore, it will not interfere or damage controls of nearby computers.
There is a unique blowback torch design found in the 375 which eliminates higher frequencies by forcing an electrical arc between the electrode and the tip. In other words, the plasma arc is created by directing the electric arc between the tip and the electrode. Additionally, the Post flow cooling feature provides for extended lifetimes of consumable items stands the gas is supplied following the release of the cutters trigger.
The Miller 375 plasma cutter is the perfect solution for light and medium duty businesses or for the serious hobbyist. It's outstanding cutting features, lifetime of consumable products, and safety features make it the perfect choice for home or business. Many Miller 375 plasma cutters can be purchased through wholesale distribution channels for approximately $1200. At this price the model 375 is highly competitive with respect to other leading plasma cutters.
The Miller 375 is rated to cut 1/4" steel at a rate of 27 inches per minute. For 3/8" steel cutter is rated at 14 inches per minute. At a maximum of 5/8" steel, the Miller 375 plasma cutter is rated at 5 inches per minute. This cutting is rated at 27 amps output at 115 V. The pressure requirements are 4.5 cubit feet per minute at 90 PSI. The duty cycle is rated at 27 amps at 90 V with a duty cycle of 35%.
The 375 plasma cutter, also known as the spectrum 375, is perfect for auto body shops, fabrication shops, auto repair shops, light industrial applications, maintenance departments, and for home use. Plasma cutting is quickly replacing the use of a gas torches because of lower operating costs, cleaner cutting, and safer operations. The Miller 375 plasma cutter is used worldwide by many of the leading metal manufacturing and fabrication companies.